Cruising the Caldon

For the first time in nearly a year we are cruising on new territory for Firecrest. Now that we don’t have any deadlines or commitments to meet, we are free to meander and explore again. It feels a bit like we are going on holiday, which is saying something, as a lot of people think life on a narrowboat is one long holiday. The Caldon Canal joins the Trent and Mersey at Etruria Junction. And is marked by a statue of James Brindley the engineer responsible for building of this Canal.

James Brindley

The potteries needed lime for their kilns, and a canal was the most efficient way to transport it from the quarries at Caldon Low, (which is the area to the east of Froghall). The proprieters borrowed some £25000 and completed it in 1778. The milemarkers measure all the way to Uttoxeter. But the section between Froghall and Uttoxeter only opened in 1811 and was closed within 40 years in order to built a rail track along it’s route.

Etruria 1 Uttoxeter 22

The first few miles of the Caldon pass through the outskirts of Stoke, where the 2 bottle kilns from the Johnson Brothers pottery have been preserved as part of a modern residential area.

The Johnson Brothers

The canal also runs through the centre of a very attractive Victorian park, complete with bandstands and fountains. You’d think it would be an idyllic place to moor for the night but a local boater warned us against it.

The bandstand in Hanley park

But it wasn’t long before we were out in the open country side surrounded by noisy birdsong. We couldn’t resist going for an evening stroll along the disused railway through the cow parsley, it felt like we were in a different world after the expanse of the Trent and Mersey.

Hayfever heaven

Our cruising took us on a twisting windy route through bluebell woods

Beautiful bluebells

And buttercup meadows

Moored at Endon

Some beautiful old stone bridges

Bridge 32

And some frustratingly awkward angled bridges that you didn’t stand a chance of getting through unscathed if you met someone intent of getting to their destination.

I hate to think what it did to their boat

There were a few swing bridges that still required a bit of effort, but they are so much quicker than the automated ones.

And some that had been partially removed, this one had a central pillar still in the canal, but at least we knew which way to go.

Hope they aren’t expecting heavy traffic

But despite the sections which needed a lot of concentration, this Canal has been a breath of fresh air and a real joy to cruise, made all the more enjoyable by some summer sunshine at long last. And we are in no hurry to complete this journey.

This is the life, who needs to go abroad for a holiday

Pottering around Stoke


From the south, Stoke on Trent itself isn’t the prettiest of places to cruise into. It suffers from the typical neglected backsides of light industrial units, security fences, barbed wire, graffiti and litter entangled in overgrown vegetation. But it is what it is, and it isn’t the worst we’ve seen. At least here the town planners have realised what an asset the canal can be and the towpath is in good condition.

A warm welcome

But there are some major highways that run close by so the mooring is either noisy, undesirable or non existent, and with 5 locks within the centre of town, it means that we have never stopped to explore the centre of Stoke itself. I have a sneaking suspicion that if I took the time to explore, Stoke could be a fascinating place with a strong industrial and creative heritage. However, we carried on cruising until we got to Etruria junction and the canal regains its prominence.

One of the old flint mills, now home to two historic working boats

Many of the old wharfs have been repurposed to serve as CRT yards and workshops for the benefit of boaters and gongoozlers alike. And although many of the heritage buildings which were once a hive of activity for the canal traffic have been allowed to fall into disrepair.

This is the Anderton wharf which possibly has some connection to the Anderton boat lift,


At least one gem remains, the Middleport Pottery has thrown open it’s gates to the tourist trade and despite still being a working pottery, it welcomes visitors.

The Middleport bottle kiln

Although we were a bit concerned about it’s health and safety notices warning people to be careful near the canal

Don’t say you haven’t been warned

The abundance of coal and clay meant that Stoke was ideally placed for entrepreneurs and innovators such as Wedgewood and Spode to create a world famous industry here and why in the mid 1700’s Brindley’s team began to dig the canal where bridge 128 now stands.

Where it all began


100 years after the canal had been in existence Westport Lake was created , although not for the benefit of the local industry, Brownhills Colliery hit the water table and flooded both the mine and surrounding land. Nowadays its a local beauty spot along side the canal.

Westport Lake

We were lucky enough to moor opposite the pottery and spent a few days walking around and enjoying the sights. (Middleport have daytime only mooring for visitors)

A prime mooring spot


We would have loved to have done the factory tour, but it is still waiting for it’s release from Covid restrictions. We were allowed to walk around the site though, and it’s very atmospheric.

I can’t imagine it was this quiet in it’s hey day

Most of Stokes bottle kilns have been dismantled now, although some just appear to have been abandoned.

So sad to see such an eyesore

As I looked opposite this decay I wondered if our descendants will feel the same nostalgia for the current factories if they are still standing in 50 years time.

I wonder how long this one will last.